Keypad Lock Settings - Mitel 5614 User Manual

Turn the Vibrator On or Off
If the vibrator is activated, it vibrates on incoming calls and messages. In addition, the vibrator
can also be activated when receiving a message during a call. For more information, refer to the
Configuration Manual for the handset; see
1 Select "Vibrator alert". Choose between "On", "On if silent" (that is, the vibrator is on
when the handset is muted), or "Off".
2 Select vibrating alert.
3 Press "Back".
Set the Key Sound
This means that every time a key is used, the handset gives a small sound.
1 Select "Key sound". Choose between "Silent, "Click", or "Tone".
2 Select key sound.
3 Press "Back".
To listen to the key sound, press the soft key "Play".

KEYPAD LOCK SETTINGS

The handset keypad can be locked automatically to minimize the risk of accidentally pressing
keys or buttons while the handset is not in use. The keypad is automatically locked after a lock
time parameter "Auto lock time" expires.
NOTE: The alarm button can be pressed while the keypad is locked. Any one of five predefined
emergency numbers can also be called while the keypad is locked as long as this feature has been
configured in the WinPDM/Device Manager. For additional information, refer to the
Configuration Manual for the handset; see
The automatic key lock can be configured by the administrator in the WinPDM/Device Manager.
For additional information, refer to the Configuration Manual for the handset; see
Documents on page 127. The user may also configure the automatic key lock as described in the
following sections.
Automatic key lock: One of the following options may be configured:
"On": the keypad is automatically locked if it is not used before the specified lock time elapses.
"On, except calls": the keypad is automatically locked if it is not used for the specified lock time.
If the user is in call when the lock time elapses, the keypad remains unlocked until the user has
completed the call.
"Off": the keypad is never automatically locked.
Auto lock time: specifies the time that elapses before the keypad is automatically locked. The
shortest time that may be specified before the key lock is applied is 5 seconds and the longest time
is 3 minutes.
Auto key unlock: the keypad is automatically unlocked when a call or message is received. When
the user has serviced the call or message, the key lock is reapplied after the specified automatic
lock time expires.
Related Documents on page 127.
Related Documents on page 127.
Related
95