Set Ring Signal For A Contact; Delete Contact; Central Phonebook - Mitel 5614 User Manual

EDIT CONTACT
1 Select "Edit contact".
2 Select contact, and press "Edit" twice.
3 Enter new name/number, and press "OK".
Tip: A variable or the character U can be added to the Work/Mobile/Other number field to
allow the user to enter additional numerical characters before calling the number. See
Chapter 11 Procedure Call
4 Press "Save".

SET RING SIGNAL FOR A CONTACT

A specific ring signal can be set for each contact.
1 Add/edit a contact according to
2 Select "Ring signal"
3 Select the ring signal to be used for the selected contact.
4 Press "Back" and the press "Save".

DELETE CONTACT

1 Select "Delete contact".
2 Select contact, and press "Delete".
3 Press "Yes" to confirm.

CENTRAL PHONEBOOK

In the Central Phonebook can be searched by name or number. The last search result can be
displayed.
When the search result is returned the contact information can be viewed. A number can be
assigned to the new contact and a message sent by selecting the "More" soft key. The number can
also be called by selecting the "Call" soft key.
1 Select "Central phonebook".
Search by Name
1 Select Search by name.
2 Enter First name and/or Last name.
TIP: When searching for a contact, adding and editing a contact, the input language can be
changed temporarily by long pressing
a foreign language.
3 Select "Search". The search result is displayed.
Search by Number
1 Select "Search by number".
2 Enter handset number, select "Search". The search result is displayed.
View Last Search Result
1 Select "Last result". Only the last result is displayed.
on page 101 for more information.
Add Contact on page 92 or
. This can be used to temporarily access characters in
Edit Contact on page 92.
93