Call Forward Profiles - Mitel 5230 User Manual

OR
- Call Forward Busy for internal callers, and/or
- Call Forward Busy for external callers, and/or
- Call Forward No Answer for internal callers, and/or
- Call Forward No Answer for external callers
• Other Call Forwarding Settings (page 19):
- Call Forward End Chaining
- Call Forward Follow 3rd Party
- Call Forward Follow Me/I Am Here
- Cancel Call Forward
To use a Call Forward Feature Key
1. Dock you PDA in a 5230 IP Appliance.
2. Start the Feature Keys application (see "Starting the 5230 PDA Phone Application" on
page 8).
3. Make sure you are in Run mode.
4. Go to the desired category page.
5. Tap the desired Call Forward Feature Key. That Call Forward setting is activated.
Note: You may hear some dial tones and see characters on your display when you
activate a Call Forward Feature Key. This is normal.

Call Forward Profiles

To view the current Call Forward profile
1. From the PDA Phone application, tap
Forwarding... in the View menu.
OR
From the Feature Keys application, select Show Current Call Forwarding in the Tools
menu.
2. The active Call Forward profile is displayed. When you are done, tap Cancel.
To program a Call Forward profile Feature Key
1. Start the Feature Keys application (see "Starting the 5230 PDA Phone Application" on
page 8).
2. In the Tools menu, select Edit.
3. Go to the desired category page.
4. Tap the Feature Key you want to program as a Call Forward profile.
5. Select Forward Profile in the drop-down list, and tap OK.
6. Enter a label for this call forward profile (for example, "Forward to cellphone").
Using the 5230 Feature Keys Application
in the Mitel Toolbar, or select Show Call
Revision A 17