Displaying And Maintaining Mpls L2Vpn; Mpls L2Vpn Configuration Examples; Configuring A Static Pw - HP 10500 Series Configuration Manual

Step
7. Return to user view.
8. Manually switch traffic to the
backup PW of the specified
PW.

Displaying and maintaining MPLS L2VPN

Task
Display LDP PW label information.
Display cross-connect forwarding
information (in standalone mode).
Display cross-connect forwarding
information (in IRF mode).
Display L2VPN information for the
Layer 3 interface bound to a
cross-connect.
Display L2VPN PW information.
Display PW class information.
Display service instance
information.
Display cross-connect group
information.

MPLS L2VPN configuration examples

Configuring a static PW

Network requirements
Create a static PW between PE 1 and PE 2 over the backbone so CE 1 and CE 2 can communicate
within VLAN 10.
Command
return
l2vpn switchover peer ip-address
pw-id pw-id
Command
display l2vpn ldp [ peer ip-address [ pw-id
pw-id ] | xconnect-group group-name ]
[ verbose ]
display l2vpn forwarding { ac | pw }
[ xconnect-group group-name ] [ slot
slot-number ] [ verbose ]
display l2vpn forwarding { ac | pw }
[ xconnect-group group-name ] [ chassis
chassis-number slot slot-number ] [ verbose ]
display l2vpn interface [ xconnect-group
group-name | interface-type
interface-number ]
display l2vpn pw [ xconnect-group
group-name ] [ ldp | static ] [ verbose ]
display l2vpn pw-class [ class-name ]
display l2vpn service-instance [ interface
interface-type interface-number
[ service-instance instance-id ] ] [ verbose ]
display l2vpn xconnect-group [ name
group-name ] [ verbose ]
235
Remarks
N/A
N/A
Remarks
Available in any view.
Available in any view.
Available in any view.
Available in any view.
Available in any view.
Available in any view.
Available in any view.
Available in any view.