HP 10500 Series Configuration Manual page 119

Step
9. Advertise a default VPN route
to a peer or peer group.
10. Apply an ACL to filter routes
received from or advertised to
a peer or peer group.
11. Save all route updates from a
peer or peer group.
12. Specify the router as the next
hop of routes sent to a peer or
peer group.
13. Configure BGP to not change
the next hop of routes sent to
an EBGP peer or peer group.
14. Specify a preferred value for
routes received from a peer or
peer group.
15. Apply a prefix list to filter
routes received from or
advertised to a peer or peer
group.
16. Configure BGP updates
advertised to an EBGP peer or
peer group to carry only
public AS numbers.
17. Configure the router as a route
reflector and specify a peer or
peer group as its client.
18. Specify the maximum number
of routes BGP can receive
from a peer or peer group.
19. Apply a routing policy to a
peer or peer group.
Command
peer { group-name | ip-address }
default-route-advertise
vpn-instance vpn-instance-name
peer { group-name | ip-address }
filter-policy acl-number { export |
import }
peer { group-name | ip-address }
keep-all-routes
peer { group-name | ip-address }
next-hop-local
peer { group-name | ip-address }
next-hop-invariable
peer { group-name | ip-address }
preferred-value value
peer { group-name | ip-address }
prefix-list prefix-list-name { export
| import }
peer { group-name | ip-address }
public-as-only
peer { group-name | ip-address }
reflect-client
peer { group-name | ip-address }
route-limit prefix-number
[ { alert-only | reconnect
reconnect-time } |
percentage-value ] *
peer { group-name | ip-address }
route-policy route-policy-name
{ export | import }
113
Remarks
Optional.
By default, no default VPN route is
advertised to a peer or peer group.
Optional.
By default, no ACL-based filtering
is configured.
By default, BGP does not save
route updates from any peer.
By default, the router sets itself as
the next hop for routes sent to an
EBGP peer or peer group, but it
does not change the next hop for
routes sent to an IBGP peer or peer
group.
Optional.
By default, the router sets itself as
the next hop for routes sent to an
EBGP peer or peer group.
In an inter-AS option C network
where an RR is used to advertise
VPNv4 routes, configure this
command on the RR so the RR does
not change the next hop of routes
sent to EBGP peers and clients.
Optional.
By default, the preferred value is 0.
By default, no prefix list based
filtering is configured.
Optional.
By default, BGP route updates
advertised to an EBGP peer or peer
group can carry both public and
private AS numbers.
By default, no RR is configured.
By default, the number of routes
that BGP can receive from a peer
or peer group is not limited.
By default, no routing policy is
applied to a peer or peer group.