Monitor Specifications; Backplane Specifications; Environmental Specifications - HP E8400A C-Size VXI Mainframe User And Service Manual

Monitor Specifications

Indicators
Switches
Diagnostic Connector

Backplane Specifications

Environmental Specifications

Operating Location
Temperature
54 Specifications
•
Input Power On
•
Power Supply Voltages within Spec (±8%)
•
Power Supply Temperature OK
•
Fans OK
•
Backplane Activity
•
SYSFAIL
•
On/Standby
•
Fan Mode
•
Reset
•
Output all 7 backplane voltages for monitoring.
•
Output +5V and +12V for remote applications (1A max each).
•
Input +5VSTDBY to backplane (1A total for pins 5 and 18 ).
•
Remotely operate On/Stdby.
•
Power supply temperature output (0 mV = 0°C, 10 mV per °C).
•
Reference temperature output (0 mV = 0°C, 10 mV per °C).
•
Fans OK output (TTL low true logic levels).
•
Backplane voltages OK output (TTL low true logic levels).
•
SYSRESET*, input or output. (TTL low-true logic levels).
•
ACFAIL*, output. (TTL low-true logic levels)
•
Ground
•
Solid state automatic daisy-chain jumpering for BUS GRANT and
IACK signals.
•
Full differential distribution of CLK10.
•
ACFAIL* and SYSRESET* in full compliance with the VMEbus
Specification.
•
Surface mount construction and no sockets for maximum reliability.
Sheltered location where air temperature and humidity is controlled within
this product's specifications and the equipment is protected against direct
exposure to climatic conditions such as direct sunlight, wind, rain, snow,
sleet and icing, water spray or splash, hoarfrost, or dew (typically indoors).
Pollution degree 2.
Operating Temperature Range: 0°C to +55°C
Storage Temperature Range: -40°C to +75°C
Appendix A