HP E8400A C-Size VXI Mainframe User And Service Manual page 33

13-slot vxi mainframe
Table of Contents

Advertisement

holes for mounting
customer-supplied
interface panel
Chapter 2
Figure 2-11. Installing the Cable Tray.
Note
Holes are provided at each end of the cable tray for mounting a
customer-supplied interface panel. The maximum height of the panel must
be 41.275 mm for a one EIA rack unit cable tray position, or 85.725 mm for
a two EIA rack unit cable tray position.The panel width cannot exceed 424
mm. The four holes across the bottom are 101.6 mm center-to-center, and
centered on the tray. The side holes are 34.9 mm center-to-center, with the
bottom hole 25.4 mm above the tray's inside surface. All holes are 12.7 mm
from the edge and have a diameter of 3.175 mm.
select holes based
on cable clearance
required
m5x8 pan head screws
Rack Mounting and Option Installation
33

Advertisement

Table of Contents
loading

Table of Contents