Hp E8400A Air Filter Kit - HP E8400A C-Size VXI Mainframe User And Service Manual

Figure 2-14. Positioning the Backplane Shields on the Connectors.

HP E8400A Air Filter Kit

Chapter 2
2. To install the Torx screws, firmly press the screw onto the Torx driver.
This prevents the screw from falling off as you reach into the
mainframe. Placing a sheet of paper under the backplane connectors
will catch screws if they fall.
3. Tighten the screws by turning them clockwise. The screws are
thread-forming and will go in slowly when you install them the first
time.
An optional air filter kit can be purchased for the HP E8400A mainframe.
Contact the HP TMO Business Center at 1-800-829-4444 for information on
availability.
Rack Mounting and Option Installation 39