HP E8400A C-Size VXI Mainframe User And Service Manual page 31

m5x8 flat head screws
Figure 2-10. Attaching the Rack Mount Adapters and Chassis Sections to the Mainframe.
Chapter 2
The mainframe can be recess mounted up to 270.7 mm (10.6 inches)
in approximately 12.3 mm (1/2 inch) increments. Note that in some
recess positions, the front screw attaching the rack slide adapter may
have to be removed.
8. Attach the chassis sections to the rack mount adapters using four
m5x8 flat head screws per side (Figure 2-10).
Standard rack mount
adapter (p/n E8400-80923)
VXIplug&play Compliant rack
mount adapter (p/n E8400-80925)
9. If additional rack space is required for other instruments, remove the
mainframe feet by lifting the tabs and sliding the feet towards the
center of the mainframe.
10.Slide the rack slide intermediate sections out from the rack slide
stationary sections until they lock into place. With one person on each
side, lift the mainframe and slide the chassis sections into the
intermediate sections until the chassis sections lock into place. Slide
the mainframe into the rack until the rack mount adapter flanges are
against the rack's vertical rails. Secure the mainframe to the rack
using the adapter dress screws.
m5x8 pan head screws
Rack Mounting and Option Installation
chassis sections
31