HP E8400A C-Size VXI Mainframe User And Service Manual page 17

Installing A- and B-Size
Instruments
Chapter 1
A-, B-, and C-size instruments can be installed in the mainframe. A- and
B-size instruments are installed using a module carrier:
•
HP E1403B A/B-size Module Carrier extends the P1 connector on
the VXIbus backplane and mounts the (A/B-size) modules flush with
C-size modules. This carrier is recommended for Hewlett-Packard
B-size, slave-only devices which have the P1 connector.
•
HP E1407A A/B Module Carrier extends the P1and P2 connectors
on the VXIbus backplane. This carrier is recommended for B-Size,
slave-only devices which have the P1/P2 connectors.
Figure 1-5 shows the installation of A- and B-size instruments.
Using the HP E8400A Mainframe 17