HP E8400A C-Size VXI Mainframe User And Service Manual page 30

rack rear
stationary section
Figure 2-8. Removing the Rack Slide Chassis Section from the Intermediate Section.
rack front
m5x12 flat head screws
(standard adapter kit)
30 Rack Mounting and Option Installation
5. Remove the chassis section from the intermediate section (Figure
2-8). (The chassis section will be connected to the mainframe in Step
7.) Slide the intermediate section back into the stationary section.
(right rack slide shown)
6. Attach the stationary section to the rack's front inside rail through the
channel nuts. Use two m5x12 flat head screws. Attach the stationary
section to the rear inside rail using two m5x12 pan-head screws
(Figure 2-9).
mounting holes when using
the VXIplug&play Compliant adapters
(left rack slide shown)
Figure 2-9. Installing the Rack Slide Stationary Sections.
7. Attach the rack mount adapters to the mainframe using the eight
m5x8 pan head screws provided. To mount the mainframe flush with
the rack front, begin with the 3rd hole from the front of the adapter
(Figure 2-10).
rack front
intermediate section
depress from back
side to remove
chassis section
rack rear
m5x12 pan head screws
(standard adapter kit)
Chapter 2