Example Step 1: Plan To Assign Synchronization Sources; Example Step 2: Gathering Unique Identifiers - ShoreTel 930D Planning And Installation Manual

A Installation Example
Example Step 1: Plan to Assign Synchronization
Sources
Each repeater in the IP930D system needs to be assigned a synchronization source within radio
range.
In this example, the repeaters in Regions A and B will obtain their synchronization from the base.
Because the repeaters in Region C are out of range of the base, they must obtain synchronization
from the repeaters in Region B.
Refer to the draft installation diagram below.

Example Step 2: Gathering Unique Identifiers

To prepare for the installation, gather the MAC address of each base, the IPUI of each handset, and
the IPEI of each repeater that you plan to install.
This example uses the following identifiers:
Base MAC Addresses (See
Rear Label)
011049138C00
011049138C01
011049138C02
86 Planning and Installation Guide
Customer Premises
R
A R
R
R
B
B
B
Handset IPUIs
(See Label under battery)
016e6003c0
016e6003c1
016e6003c2
016e6003c3
016e6003c4
016e6003c5

Example Step 1: Plan to Assign Synchronization Sources

Repeater B Base
R R
R R
R R
B C
Repeater IPEIs
(See Rear Label)
016e6003b0
016e6003b1
016e6003b2
016e6003b3
016e6003b4
016e6003b5
ShoreTel IP Phone 930D