Understanding Environmental Requirements - ShoreTel 930D Planning And Installation Manual

2 Planning
Using a PoE Wire Adapter and Splitter to Power the Repeater
Using a PoE wire adapter and splitter allows you to install a repeater in a location that does not have a
nearby AC outlet. Use the splitter to provide power only; do not use the Ethernet cable provided by the
splitter. Refer to the illustration below.
Splitter Ethernet
cable (do not use)
Linksys splitter

Understanding Environmental Requirements

Consider the following environmental guidelines when planning your IP930D installation:
Mount bases and repeaters indoors, in dry and protected areas, and connect these components to

indoor wiring only.
Whenever possible, mount the base near the ceiling, vertically on the wall. Avoid mounting on

metal walls, metal beams, or on concrete structures containing steel reinforcement.
Bases and repeaters must be placed with at least one meter of separation between units. Range

and system capacity might be reduced if components are located less than one meter apart.
IP930D components emit RF radiation that is below all government and industry limits. However, some
devices containing sensitive microphones can be affected by this radiation and should be kept at a
distance from IP930D components.
ShoreTel IP Phone 930D
Understanding Environmental Requirements
Powered Ethernet cable plugs in here
PoE wire adapter
Repeater
Planning and Installation Guide 19