ShoreTel 930D Planning And Installation Manual page 62

Hide thumbs Also See for 930D:
Table of Contents

Advertisement

5
Reference Material
Parameter
DectHandset
DectHandsetAppName
DectHandsetLevelsDb
DectHeadsetLevelsDb
DectHistory
DectIntercom
DectMcDebug
62
Planning and Installation Guide
Value Type
Value
Up to 256 Characters
This parameter associates an IP address to a specific
handset. This parameter may be repeated in a
configuration file up to 4 times, once for each handset
assigned to the bases. Two values are specified: the
IPUI (10 characters) and IP address. IP address must be
specified in dotted decimal notation for 3 of the 4
handsets. One of the four handsets may use the value
"Base" to reuse the IP address assigned to the base.
Examples:
DectHandset 1abcdef012, Base
DectHandset 1abcdef013, 192.168.0.12
The IPUI can be found on the label underneath the
battery on the back of the handset.
Up to 32 alphanumeric
This is the name of the handset application image. The
characters
application file name can be at most 24 characters long.
The combination of filename and path can be up to 32
characters long. A new application name is specified in a
configuration file and is checked against the NV value to
decide if a new version needs to be downloaded. The
NV value is updated after a successful download and
flash programming sequence.
Up to 255 ASCII
Set the audio levels of the handset using a comma
Characters
separated list of the following settings. The default
values in decimal are listed next to the name for clarity.
TxGain 0
RxGain1 -14
RxGain2 -11
RxGain3 -8
RxGain4 -6
RxGain5 -2
RxGain6 2
Sidetone 0
It is recommended that you do not change any value by
more than +/- 2 dB from the default values listed.
Up to 255 ASCII
Set the audio levels of the headset using a comma
Characters
separated list of the following settings. The default
values in decimal are listed next to the name for clarity.
TxGain 0
RxGain1 -3
RxGain2 0
RxGain3 3
RxGain4 6
RxGain5 9
RxGain6 12
Sidetone 0
It is recommended that you do not change any value by
more than +/- 2 dB from the default values listed.
Up to 64 ASCII
String that is displayed on the Menu screen to access
Characters
the call history. Must be 14 characters or less.
Characters in this string must be specified using UTF-8.
Up to 64 ASCII
String that is displayed on the Menu screen to access
Characters
the Intercom. Must be 14 characters or less. Characters
in this string must be specified using UTF-8.
0, 1, 2, 3
0=none, 1=Data Sync Logging, 2=Auto DECT Tree
Logging, 3= Data Sync and DECT Tree Logging.
Understanding Configuration Parameters
Sources
Default
CFG
""
CFG
Value from factory
in NV Storage
CFG
Refer to "Value"
column.
CFG
Refer to "Value"
column.
CFG
"Call History"
CFG
"Intercom"
CFG
0
ShoreTel IP Phone 930D

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents