ShoreTel 930D Planning And Installation Manual page 63

5 Reference Material
Parameter
DectMultiCell
DectMultiMaster
DectOk
DectNbOnly
DectRepeaterApp
Name
DectRepeaterAuto
CfgMode
DectRepeaterData
Configured
DectRepeaterIpei
DectRepeaters
DectRepeaterRpn
DectRepeaterSync
SrcRpn
ShoreTel IP Phone 930D
Value Type Value
Yes or No This parameter specifies whether or not the base is part
of a system of more than one base or repeater.
Yes or No Some manually configured base synchronization
arrangements require more than one synchronization
master (when a base is not within radio range, for
example). In this case the value should be set to Yes.
Up to 64 ASCII String that is displayed on a softkey to OK the current
Characters operation. Must be 6 characters or less. This must
exactly match the systems softkey string assignment for
the active language. Characters in this string must be
specified using UTF-8.
0 or 1 Limit all calls to narrowband if 1 by removing G.722 from
SDP offers/answers.
Up to 32 alphanumeric This is the name of the repeater application image. The
characters application file name can be at most 24 characters long.
The combination of filename and path can be up to 32
characters long. A new application name is specified in a
configuration file and is checked against the NV value to
decide if a new version needs to be downloaded. The
NV value is updated after a successful download and
flash programming sequence.
Comma separated list Comma separated list of mode values that assigns the
of up to 100 Mode synchronization mode to each repeater in the
values 0, 1, or 2 DectRepeaterIpei list. 0=manual assignment using
DectRepeaterSyncSrc, 1=local automatic, 2=chain
automatic
Comma separated list Comma separated list of configured state values that
of up to 100 configured assigns the configured state to each repeater in the
values 0 or 1 DectRepeaterIpei list. 0=not configured, 1=configured
Comma separated list Comma separated list of 4 repeater IPEIs that are
of 4 repeater values in associated with this base. Index of this list links a
hex specific repeater to other repeater parameter such as
DectRepeaterRpn. Unused repeaters use IPEI=0.
Example:
DectRepeaterIpei 005ad85dd0, 005ad85dd1,0,0,0,0,0
Comma separated list Comma separated list of up to 4 repeater IPEIs that
of up to 4 IPUI values associated with this base. This is used as a white list to
in hex limit repeater registrations and IPUI values must be
unique to each base (no reuse).
Example:
DectRepeaters 005ad85dd0, 005ad85dd1
Comma separated list Comma separated list of RPN values that assigns an
of up to 100 decimal or RPN value to each repeater in the DectRepeaterIpei list.
hex RPN values Example:
between 0 and 255 DectRepeaterRpn 0x0, 0x1
Comma separated list Comma separated list of RPN values that assigns the
of up to 100 decimal or synchronization source to each repeater in the
hex RPN values DectRepeaterIpei list.
between 0 and 255 Example:
DectRepeaterSyncSrcRpn 0x0, 0x1
Understanding Configuration Parameters
Sources Default
CFG "No"
CFG "No"
CFG "Ok"
CFG 1
CFG ""
CFG 1
CFG 0
CFG ""
CFG ""
CFG 0
CFG 0
Planning and Installation Guide 63