This chapter contains the following topics:
Replacing a Handset
Replacing a Repeater
Replacing a Base
Adding a new Base and Handsets
Updating IP930D Firmware
Replacing a Handset
To replace a handset, follow this procedure.
1. In the ShoreTel IP930D Configuration Tool, load the saved *.XML project file for the existing
installation by choosing File > Open Project.
Note
Make sure the file is up to date and matches the installed configuration or you will cause the
system to stop working when you apply the files it generates.
ShoreTel IP Phone 930D
Maintaining Your System
4.
on page 35
on page 38
on page 38
on page 39
on page 44
CHAPTER
Planning and Installation Guide
35