Table of Contents
Advertisement
Setting Up Using the Setup Guide
When the machine is turned on (
assist you to configure the initial settings of the machine by following the on-screen guidance. In the Setup Guide, the
setting screens are displayed in the following order.
Step 1
Set the language to be displayed on the operation panel screen or in reports, as well as the
country or region where the machine will be used.
Step 2
Adjust the machine's date/time.
Step 3
To achieve good copy quality, adjust the gradation.
Turning ON the Machine(P. 116) ) for the first time, the Setup Guide starts up to
Setting the Display Language and the Country or Region
1
Select a language.
2
Select <Yes>.
3
Select a country or region.
Setting the Date and Time
1
Select a time zone.
What is UTC?
●
Coordinated Universal Time (UTC) is the primary time standard by which the
world regulates clocks and time. The correct UTC time zone setting is required
for Internet communications.
2
Enter the date and time, and select <Apply>.
Performing the Color Adjustment
1
Select <Yes>.
●
If you select <No>, color adjustment is not performed, and the Setup Guide
proceeds to step 4.
2
Check that the size and type of paper displayed on the screen is loaded in the
machine, and select <OK>.
3
Confirm the procedure, and select <Start>.
➠
An adjustment image is printed.
4
Open the feeder after the screen displayed during printing is closed.
5
Place the adjustment image on the platen glass.
●
Place the adjustment image with the print side facing down while checking that
the black stripe is placed on the back side of the machine.
Setting Up
9
1647-009
Advertisement
Table of Contents
