Table of Contents
Advertisement
Setting Up Connection by Selecting a Wireless Router
You can search the wireless routers (or access points) available for connection and select one from the display of the
machine. For the network key, enter a WEP key or PSK. Before selecting a wireless router, check and write down the
required setup information, including the SSID and network key (
Security settings
●
If the wireless connection is set up by selecting a wireless router, the WEP authentication method is set to
<Open System> or the WPA/WPA2 encryption method is set to <Auto> (AES-CCMP or TKIP). If you want to
select <Shared Key> for WEP authentication or <AES-CCMP> for WPA/WPA2 encryption, you need to set up
the connection using <Enter Manually>.
1
Select <Menu> in the Home screen.
2
Select <Preferences>
●
If the login screen appears, enter the correct ID and PIN.
3
Select <Wireless LAN Settings>.
●
If the <Do you want to enable the wireless LAN?> message is displayed, select <Yes>.
4
Read the message that is displayed, and select <OK>.
5
Select <SSID Settings>.
6
Select <Select Access Point>.
➠
The machine starts searching for available wireless routers.
●
If a message is displayed telling that access point cannot be found, see
Message(P. 644) .
7
Select a wireless LAN router.
●
Select the router whose SSID matches the one that you have written down, and select <Next>.
Setting Up
Setting Up Connection by Specifying Detailed Settings(P. 26)
Home Screen(P. 122)
<Network>.
23
Checking the SSID and Network Key(P. 29) ).
Logging in to the Machine(P. 133)
Countermeasures for Each
1647-00L
Advertisement
Table of Contents
