Table of Contents
Advertisement
Is the print faded or uneven in density depending on the paper type or the
environmental conditions? (MF735Cdw / MF733Cdw / MF731Cdw)
●
Change the setting for <Reduce Toner Flaking>. The improvement effect is stronger with <Mode 2> than
<Mode 1>. First try with <Mode 1>.
<Reduce Toner Flaking>(P. 480)
●
Setting a greater improvement effect may result in curled printouts or slower printing speed.
Are you using the machine in an environment with high humidity?
(MF735Cdw / MF733Cdw / MF731Cdw)
●
Setting <Reduce Toner Fixing Stain 2> to <Mode 2> may solve the problem.
<Reduce Toner Fixing Stain 2>(P. 481)
●
If you set to <Mode 2>, printouts may be curled.
Is the machine installed in an environment where the temperature changes
rapidly and drastically?
●
When the temperature changes rapidly in the environment where the machine is installed, condensation
occurs, which may cause fading or bleeding in images and text. If <Control Condensation> is set to <On>,
condensation inside the machine will be removed. Condensation removal may be performed automatically
due to temperature change.
<Control Condensation>(P. 484)
●
While condensation removal is being performed, printing may not be performed properly and blank paper
may be output.
●
If you set to <On>, you need to keep the machine turned ON to maintain the effect of condensation
removal.
A Portion of the Page Is Not Printed
Troubleshooting
632
Advertisement
Table of Contents
