Table of Contents
Advertisement
Setting a Shared Folder as a Save Location
The feature of scanning to shared folders is also called "Scan to SMB" because the feature uses Server Message Block
(SMB), a Windows-specific technology. SMB is a protocol for sharing resources, such as files and printers, with more
than one device in a network (
documents into a shared folder in the network via SMB, specify the location of the shared folder from a computer in
advance. This section describes how to specify the save location by using the Send Function Setting Tool.
●
You can also use the Remote UI to specify the location of the shared folder as save destination by registering
the folder to the Address Book. Registering Destinations in the Address Book from Remote UI.
Registering Destinations from Remote UI(P. 430)
1
Start the Send Function Setting Tool.
Using a Web browser
Enter "http://<the IP address of the machine>/sendsupport_login.html" in the address field of a Web browser,
and press the [ENTER] key.
Using the DVD-ROM
1
Insert the provided DVD-ROM into the drive on the computer.
●
Select a language and click [OK] if you are prompted to do so.
2
Click [Start Software Programs].
●
If the [Software Programs/Manuals Setup] screen is not displayed, see
Programs/Manuals Setup] Screen(P. 729) .
●
If [AutoPlay] is displayed, click [Run MInst.exe].
3
Click [Start] for [Send Function Setting Tool].
4
Click [Next].
●
If you want to view "Send Setting Guide," click [How to Set].
●
If the screen that cancels the Windows firewall is displayed, click [Yes].
5
Select the machine from [Device List] and click [Next].
Setting Up
Configuring SMB(P. 59) ). To configure the machine for saving your scanned
94
1647-023
Displaying the [Software
Advertisement
Table of Contents
