Table of Contents
Advertisement
<Off>
<On>
<Menu>
<Adjustment/Maintenance>
Processing>
●
If you set to <On>, print density may be lighter.
<Correct Color Mismatch>
If color mismatch occurs, setting to <On> may solve the problem.
<Off>
<On>
<Menu>
<Adjustment/Maintenance>
Processing>
●
If you set to <On>, the printing speed may be slower.
<Reduce Drum Streak>
If streaks appear on printouts, setting to <On> may solve the problem.
<Off>
<On>
<Menu>
<Adjustment/Maintenance>
Processing>
<Reduce Toner Flaking>
Toner may peel off the printed page depending on the paper type or the environmental conditions. In this case,
setting this item may solve the problem. The improvement effect is stronger with <Mode 2> than <Mode 1>.
First try with <Mode 1>.
<Off>
<Mode 1>
<Mode 2>
Setting Menu List
<Prevent Fogging>
<On>
*
<Correct Color Mismatch>
<Reduce Drum Streak>
*
480
<Adjust Image Quality>
<Yes>
<Adjust Image Quality>
<On>
<Yes>
<Adjust Image Quality>
<On>
<Special
<Special
<Special
Advertisement
Table of Contents
