Table of Contents
Advertisement
<Change Default Settings (Fax)>
You can change the default settings used for sending faxes. The selected settings are used as the default
settings when scanning originals.
<Resolution>
<200 x 100 dpi (Normal)>
<200 x 200 dpi (Fine)>
<200 x 200 dpi (Photo)>
<200 x 400 dpi (Superfine)>
<400 x 400 dpi (Ultrafine)>
<Density>
Nine Levels
<2-Sided Original >
<Off>
<Book Type>
<Calendar Type>
<Sharpness>
Seven Levels
<Off-Hook Alarm>
Select whether the machine makes an alert sound when the handset of a telephone connected to the machine
is not properly set on the cradle. You can also adjust the volume of the alert sound.
0
to 3
<Menu>
<Function Settings>
volume of the alert sound
<ECM TX>
Enable or disable error correction mode (ECM). ECM checks for fax data errors and corrects them. To reduce
errors on received faxes, see
<Off>
<On>
<Menu>
<Function Settings>
●
ECM must be enabled on both the machine and the other fax device because error checks are
performed on both the sending and receiving devices.
Setting Menu List
Changing the Default Settings for Functions(P. 176)
<Send>
<Apply>
<ECM RX>(P. 549) .
<Send>
542
<Fax Settings>
<Off-Hook Alarm>
<Fax Settings>
<ECM TX>
Select the
<On>
Advertisement
Table of Contents
