Dense Wavelength Division Multiplexing Commands on the Cisco ASR 9000 Series Router
Task ID
Task ID
dwdm
Examples
The following example shows how to enable TCA reporting on the optics layer reporting for the maximum
OPT:
RP/0/RSP0/CPU0:router(config)# controller dwdm 0/0/0/0
RP/0/RSP0/CPU0:router(config-dwdm)# pm 15-min optics report opt max-tca enable
Related Commands
Command
show controller dwdm pm, on page 63
Cisco ASR 9000 Series Aggregation Services Router Interface and Hardware Component Command Reference,
Operations
read, write
Description
Displays performance monitoring information for a DWDM
controller.
pm optics report enable
Release 5.3.x
37