Link Bundling Commands on the Cisco ASR 9000 Series Router
Task ID
Task ID
bundle
Examples
The following example shows how to set the number of active links required to bring up a specific bundle.
In this example, the user sets the required number of active links required to bring up Ethernet bundle 5 to 2:
RP/0/RSP0/CPU0:router(config)# interface Bundle-Ether 5
RP/0/RSP0/CPU0:router(config-if)# bundle maximum-active links 1
Related Commands
Command
bundle minimum-active links, on page 581
show bundle, on page 619
Cisco ASR 9000 Series Aggregation Services Router Interface and Hardware Component Command Reference,
Operations
read, write
Description
Sets the number of active links required to bring up a specific
bundle.
Displays information about configured bundles.
bundle maximum-active links
Release 5.3.x
579