Cisco Asr 9000 Series Aggregation Services Router Interface And Hardware Component Command Reference - Cisco ASR 9000 Series Command Reference Manual

show interfaces bvi
Field
total input drops
drops for unrecognized upper-level protocol
Received x broadcast packets
multicast packets
packets output
bytes
total output drops
Output x broadcast packets
multicast packets
Related Commands
Command
interface bvi, on page 554

Cisco ASR 9000 Series Aggregation Services Router Interface and Hardware Component Command Reference,

Release 5.3.x
562
Integrated Routing and Bridging Commands on the Cisco ASR 9000 Series Router
Description
Total number of valid packets that were dropped after
they were received. This includes packets that were
dropped due to configured quality of service (QoS)
or access control list (ACL) policies. This does not
include drops due to unknown Layer 3 protocol.
Total number of packets that could not be delivered
because the necessary protocol was not configured
on the interface.
Total number of Layer 2 broadcast packets received
on the interface. This is a subset of the total input
packet count.
Total number of Layer 2 multicast packets received
on the interface. This is a subset of the total input
packet count.
Number of packets sent from the interface.
Total number of bytes successfully sent from the
interface.
Number of packets that were dropped before being
transmitted.
Number of Layer 2 broadcast packets transmitted on
the interface. This is a subset of the total output packet
count.
Total number of Layer 2 multicast packets received
on the interface. This is a subset of the total output
packet count.
Description
Creates a BVI interface.