Show Ppp Sso Alerts - Cisco ASR 9000 Series Command Reference Manual

PPP Commands onthe Cisco ASR 9000 Series Router

show ppp sso alerts

To display all Inter-Chassis Stateful Switchover (ICSSO) alerts that have occurred, use the show ppp sso
alerts command in EXEC mode.
show ppp sso alerts location node-id
Syntax Description
location node-id
Command Default
No default behavior or values
Command Modes
EXEC
Command History
Release
Release 3.9.0
Usage Guidelines
To use this command, you must be in a user group associated with a task group that includes appropriate task
IDs. If the user group assignment is preventing you from using a command, contact your AAA administrator
for assistance.
This command displays the following information for alerts that have prevented a standby session from being
brought to the Standby-Up state using replicated data.
• The interfaces on which the alerts have occurred
• The layer in which the error has occurred
• A short description of the error
Only one error is reported for each layer for each interface. The error displayed is the most recent error
Note
that has occurred.
Task ID
Task ID
ppp
Specifies the full qualified path of a specific node in the format
rack/slot/module.
Cisco ASR 9000 Series Aggregation Services Router Interface and Hardware Component Command Reference,
Modification
This command was introduced.
Operations
read
show ppp sso alerts
Release 5.3.x
765