SONET Controller Commands on the Cisco ASR 9000 Series Router
Examples
The following example shows how to configure an APS group for unidirectional mode:
RP/0/RSP0/CPU0:router(config)# aps group 1
RP/0/RSP0/CPU0:router(config-aps)# unidirectional
Related Commands
Command
aps group (global), on page 842
show aps, on page 893
Cisco ASR 9000 Series Aggregation Services Router Interface and Hardware Component Command Reference,
Description
Adds an automatic protection switching (APS) group and enter APS
group configuration mode.
Displays the operational status for all configured SONET APS
groups.
unidirectional
Release 5.3.x
931