G709 Odu Overhead Tti - Cisco ASR 9000 Series Command Reference Manual

Dense Wavelength Division Multiplexing Commands on the Cisco ASR 9000 Series Router

g709 odu overhead tti

To configure the Trail Trace Identifier (TTI) level for an Optical Channel Data Unit (ODU), use the g709
odu overhead tti command in DWDM configuration mode. To return to the default, use the no form of this
command.
g709 odu overhead tti {expected| sent} {ascii| hex}tti-string
no g709 odu overhead tti {expected| sent} {ascii| hex}tti-string
Syntax Description
expected
sent
ascii
hex
tti-string
Command Default
No TTI level string is configured.
Command Modes
DWDM configuration
Command History
Release
Release 3.9.0
Usage Guidelines
To use this command, you must be in a user group associated with a task group that includes appropriate task
IDs. If the user group assignment is preventing you from using a command, contact your AAA administrator
for assistance.
Task ID
Task ID
dwdm
Configures the expected TTI string.
Configures the transmit TTI string.
Indicates that the string is in ASCII format.
Indicates that the string is in hexidecimal format.
The TTI level string. You can configure the TTI level string in ASCII string format
or hexadecimal format. The ASCII text string can be a maximum of 64 characters.
The hexadecimal string length must be an even number and can be a maximum of
128 bytes.
Cisco ASR 9000 Series Aggregation Services Router Interface and Hardware Component Command Reference,
Modification
This command was introduced.
Operations
read, write
g709 odu overhead tti
Release 5.3.x
11