snmp-server traps frame-relay pvc
Examples
The following example shows how to configure the router to send SNMP trap notifications for a Frame Relay
PVC:
RP/0/RSP0/CPU0:router(config)# snmp-server host 12.26.25.61 traps public udp-port 5000
RP/0/RSP0/CPU0:router(config)# snmp-server community public RW
RP/0/RSP0/CPU0:router(config)# snmp-server traps frame-relay pvc interval 50
Related Commands
Command
snmp-server community
snmp-server host
Cisco ASR 9000 Series Aggregation Services Router Interface and Hardware Component Command Reference,
Release 5.3.x
492
Frame Relay Commands on the Cisco ASR 9000 Series Router
Description
Configures the community access string to permit
access to the SNMP.
Specifies the recipient of an SNMP notification
operation.