Table of Contents
Advertisement
2 SYSTEM CONFIGURATION
2 SYSTEM CONFIGURATION
2.1 Applicable Systems
This section describes the system configuration for the Q64RD.
(1) Applicable module and the number of modules that can be installed
CPU module
Network module
(2) Base Unit in which the conversion module can be installed
(3) Compatibility with a multiple PLC system
(4) Compatibility with online module change
The Q64RD of function version A is not available.
The products of function version C include the functions of the products of function
versions A and B.
2 - 1
The following are the CPU module and network module (for remote I/O stations)
in which the Q64RD can be installed and the number of modules that can be
installed.
Applicable module
Q00JCPU
Q00CPU
Q01CPU
Q02CPU
Q02HCPU
Q06HCPU
Q12HCPU
Q25HCPU
Q12PHCPU
Q25PHCPU
QJ72LP25-25
QJ72BR15
QJ72LP25G
QJ71LP25GE
1 See User's Manual (Function Explanation, Program Fundamentals) for the CPU module to use.
2 See Q Corresponding MELSECNET/H Network System Reference Manual (Remote I/O
network).
The Q64RD can be installed in any I/O slot ( 3) of the base unit. However, a
power shortage may occur depending on the combination with other installed
modules and the number of modules used, so always take into consideration the
power supply capacity when installing modules.
3 Limited to the range of the number of I/O points in the CPU module and network module (for
remote I/O stations).
First read the QCPU (Q mode) user's manual (Function Explanation, Program
Fundamentals) if the Q64RD is used with a multiple PLC system.
(a) Compatible Q64RD
Use a Q64RD with function version B or higher if using the module in a
multiple PLC system.
(b) Intelligent function module parameters
Perform PLC write of the intelligent function module parameters to the
control PLC of the Q64RD only.
To make an online module change, use the module of function version C or later.
POINT
Number of modules that
can be installed
Maximum 16
Maximum 24
Can be installed in Q mode only
Maximum 64
1
(
)
Maximum 64
MELSECNET/H Remote I/O
Maximum 64
station (
MELSEC-Q
2
Remarks
1
(
)
1
(
)
2
)
2 - 1
Advertisement
Table of Contents
Troubleshooting
