Mitsubishi Q64RD User Manual page 129

APPENDIX
Control data setting
Offset/gain value restoration
App. - 18
(2) Operation error
In any of the following cases, an error occurs and the corresponding error code is
stored into the completion status area (S)+1.
Error code
161
162
163
(3) Program example
The following program is designed to read the offset/gain values of the A/D
converter module mounted in the position of I/O number X/Y0 to X/YF when M11
is turned ON.
Case resulting in operation error
The G.OGSTOR instruction was executed in the offset/gain setting
mode.
The G.OGSTOR instruction was executed consecutively.
The G.OGSTOR instruction was executed for the model that differs
from the model for which the G.OGLOAD instruction had been
executed.
Performs processing at abnormal completion
MELSEC-Q
Dedicated instruction
(GP.OGSTOR)
App. - 18