Table of Contents
Advertisement
5 UTILITY PACKAGE (GX Configurator-TI)
3)
QCPU
Q25HCPU
MODE.
RUN.
ERR.
USER.
BAT.
BOOT.
A
USB
RS-232
Figure 5.1 Correlation chart for data created using the utility package
5 - 7
(b) Steps 1) to 3) shown in Figure 5.1 are performed using the following
operations.
1) Operating from GX Developer.
[Project]
2) Operating from the utility parameter setting module selection screen.
[File]
3) Operating from GX Developer.
[Online]
module parameters"
Or, operate from the utility parameter setting module selection screen.
[Online]
<Text file>
(a) A text file is created by performing the initial setting or automatic refresh
setting, or selecting text file creation in the monitor/test screen. The text
files can be utilized to create user documents.
GX Developer
/GX Configurator-TI
Project
1)
A
2)
[Open existing project] / [Save project] / [Save project as]
[Open file] / [Save file]
[Read from PLC] / [Write to PLC]
[Read from PLC] / [Write to PLC]
Disk
Project
A
B
A : Indicates an intelligent
function module parameter.
B : Indicates the data
saved by text file creation.
MELSEC-Q
"Intelligent function
Personal computer
5 - 7
Advertisement
Table of Contents
Troubleshooting
