Energy Saving; Energy Save; Energy Saver Modes - Ricoh MD-P2 Field Service Manual

7. Energy Saving

Energy Save

Energy Saver Modes

Customers should use energy saver modes properly, to save energy and protect the environment.
The area shaded grey in this diagram represents the amount of energy that is saved when the timers are
at the default settings. If the timers are changed, then the energy saved will be different. For example, if
the timers are all set to 60 min., the grey area will disappear, and no energy is saved before 60 min.
expires.
Timer Settings
The user can set these timers with User Tools (System settings > Timer setting)
• Panel off timer (10 sec, 1 min, 5 min, 15 min, 30 min or 45 min): Panel Off Mode. Default setting:
Off (If this timer is "On": 10 sec.)
• Auto off timer (1, 5, 8, 15, 30 or 60 min): Off/Sleep Mode. Default settings: 8 min.
Normally, Panel Off timer < Auto Off timer. But, for example, if Auto Off timer < or = Panel Off timer, the
machine goes immediately to Off mode when the Auto Off time expires. It skips the Panel Off mode.
7
221