Air Intake Fan - Ricoh MD-P2 Field Service Manual

4. Replacement and Adjustment
4
5. Remove the mylar [A] securing the three hooks of the waste toner overflow sensor (at the bottom of
this sensor base).
• Reattach this mylar after reinstalling the waste toner overflow sensor.
6. Waste toner overflow sensor [B] (hooks,
• When reinstalling the waste toner overflow sensor, connect it to the black connector of the harness.

Air Intake Fan

1. Remove all AIO Cartridge. (
2. Image transfer belt unit (
3. EGB ( p.79)
4. Waste toner sensor base (
5. Remove two screws [A] for the air intake fan base.
48
x 1)
p.36)
p.41)
p.46 "Waste Toner Bottle Set Sensor")