Configuration Page Information; Overview - Ricoh MD-P2 Field Service Manual

Table of Contents

Advertisement

Configuration Page Information

Overview

The configuration page for this model has information about the machine's status. Print this sheet as
shown below. Check the configuration page when doing machine maintenance.
To Print the Configuration Page from the Machine
Before turning on the machine
1. Hold down the "OK" key, and then turn on the main switch of the printer with holding down the
"OK " key.
2. Keep holding down the "OK" key for approximately 5 seconds.
When the machine is power-on
1. Press "Menu" key.
2. Press the " " or " " key to select "List/Test Print", and then press the "#Enter" key.
3. Press the "#Enter" key at the "Config. Page".
Configuration Page Information
5
173

Advertisement

Table of Contents
loading

This manual is also suitable for:

M075

Table of Contents