Installing Hard Drives In The Chassis - Supero 7047GR-TPRF User Manual

S W
UPER ORKSTATION 7047GR-TPRF User's Manual
6-6

Installing Hard Drives in the Chassis

Chassis hard drives are mounted in drive carriers to simplify their installation and
removal from the chassis. These carriers also help promote proper airflow for the
drive bays.
Installing Hard Drives
1. Unlock and open the chassis cover.
2. Press the release button to extend the drive tray handle (see Figure 6-14).
3. Using the handle, pull the drive tray out by the handle. The drive is hot
swappable; there are no cables to disconnect.
4. Remove the screws holding the drive tray to the dummy drive.
Figure 6-14. Installing Hard Drives
6-14
Release Button
Drive Tray Handle