Table of Contents
Advertisement
Connector
AUDIO_FP
COM1/COM2
FAN#1~6, FAN
#A~D, FAN11
I-SATA 0-5
JBAT1
JD1
JF1
JIPMB1
JL1
JOH1
JPI
C1
2
JPW1
JPW2/JPW3
JPW4
JSD1
JSPDIF_In
JSTBY1
JTPM1
JUIDB
LAN1/LAN2
(IPMI) LAN
S-SATA 0-3
SP1
T-SGPIO 1/2
USB 0/1, 2/3
USB4, USB5
USB 6/7, 8/9
LED
Description
LED1
BMC Heartbeat LED
LED2
Standby PWR LED
LED3
UID Switch LED
Note: LAN connections will be available when two CPUs are installed.
Description
Front Panel Audio Header (Optional)
Back Panel COM Port1/Front Accessible COM2 Header
CPU/System Fan Headers (Fan1~Fan4, Fan5: CPU1 Fan,
Fan6: CPU2 Fan, FanA~FanD, Fan11)
Two SATA 3.0 Ports (I-SATA 0-1), four SATA 2.0 Ports (I-
SATA 2-5)
Onboard Battery (See Chpt. 3 for Used Battery Disposal)
Power LED/Speaker Header (Pins 4~7:External Speaker,
Pins 6/7: Internal Speaker)
Front Panel Control Header
4-pin External BMC I
Chassis Intrusion
Overheat LED Indicator
Power System Management Bus (SMB) Header
24-Pin ATX Main Power Connector
12V 8-Pin Power Connectors
4-Piin Power Connector
SATA DOM (Device-On-Module) Power Header
SPDIF (Sony/Philips Digital Interface) In Header
Standby Power Header
TPM (Trusted Platform Module)/Port 80
UID (Unit Identification) Switch
G-bit Ethernet Ports 1/2 (See Note Below)
IPMI_Dedicated LAN
SATA 2.0 Ports
Internal Speaker (Onboard Buzzer)
Serial Link General Purpose I/O Headers for SATA Ports
Back Panel USB 0/1, 2/3 Ports
Front Accessible Type A USB 4/5 Ports
Front Accessible USB 6/7, 8/9 Headers
State
Green
Green: On
5-15
Chapter 5: Advanced Serverboard Setup
C Header (for an IPMI Card)
2
Status
BMC Normal
SB Power On
Advertisement
Table of Contents
