This chapter covers the steps required to install components and perform
maintenance on the chassis. The only tool you will need to install components and
perform maintenance is a Phillips screwdriver.
Tools Required: The only tool you will need to install components and perform
maintenance is a Philips screwdriver.
Warning: Review the warnings and precautions listed in the manual before setting up
or servicing this chassis. These include information in Chapter 4: System Safety and
the warning/precautions listed in the setup instructions.
Figure 6-1. Chassis: Front and Rear Views
Front
Control
Panel
Storage
Module
Front Lock
Cover
Chapter 6
Advanced Chassis Setup
Figure 6-2. Chassis in Rack Mount Mode
Chapter 6: Advanced Chassis Setup
I/O Shield
PCI Card
Slots
6-1
Power
Supplies