Supero 7047GR-TPRF User Manual page 54

S W
UPER ORKSTATION 7047GR-TPRF User's Manual
Warning: You can only install the CPU to the socket in one direction. Make sure that
the CPU is properly inserted into the socket before closing the load plate. If it doesn't
close properly, do not force it as it may damage your CPU. Instead, open the load
plate again and double-check that the CPU is aligned properly.
7. With the CPU in the socket,
inspect the four corners of the
CPU to make sure that they are
flush with the socket.
8. Close the load plate. Lock the
lever labeled 'Close 1st', then lock
the lever labeled 'Open 1st'. Use
your thumb to gently push the
load levers down until the lever
locks.
9. Repeat steps to install a CPU to
socket 2.
Gently close
the load plate.
Push down and lock the
level labeled 'Close 1st'.
Lever Lock
5-6
Push down
and lock the
lever labeled
'Open 1st'.