Removing And Installing 3.5" Hard Drives - Supero SuperWorkstation 5038A-IL User Manual

S W
uper orkstation 5038A-IL User's Manual
6-4

Removing and Installing 3.5" Hard Drives

Figure 6-3. Removing a Hard Drive Carrier from the Hard Drive Cage
The SC732 chassis must be powered-down before hard drives can be removed
from the hard drive carriers.
Removing and Installing 3.5" Hard Drives
1. Disconnect the chassis from any power source.
2. Rotate the hard drive cage outward 90 degrees as described in section 6-3.
3. Disconnect all of the cables from the hard drive.
4. Press the release tab on the side of the hard drive carrier that is to be re-
moved from the hard drive cage.
5. Gently slide the hard drive carrier out of the hard drive cage.
1
1 Release Tabs
5
6-4
4