Table of Contents
Advertisement
S
W
UPER
ORKSTATION 7047GR-TPRF User's Manual
VGA Enable/Disable
JPG1 allows you to enable or disable
the VGA port. The default position is on
pins 1 and 2 to enable VGA. See the
table on the right for jumper settings.
Watch Dog Enable/Disable
JWD controls the Watch Dog function.
Watch Dog is a system monitor that
can reboot the system when a software
application hangs. Jumping pins 1-2
will cause WD to reset the system if
an application hangs. Jumping pins 2-3
will generate a non-maskable interrupt
signal for the application that hangs.
See the table on the right for jumper
settings. Watch Dog must also be
enabled in BIOS.
BMC Enable
Jumper JPB1 allows you to enable
the embedded Nutovon (Baseboard
Management) Controller to provide
I P M I 2 . 0 / K V M s u p p o r t o n t h e
serverboard. See the table on the
right for jumper settings.
'97 Audio Enable
Close pins 1~2 of Jumper JPAC1 to
enable '97 Audio support. See the
table on the right for jumper settings.
The default setting is enabled.
High Definition (HD) Audio Enable
Jumper JHD_AC1 allows the user to
enable High Definition Audio support.
Close pins 1~2 of JHD_AC1 to use
HD audio. See the table on the right
for jumper settings. The default setting
is enabled.
VGA Enable/Disable Jumper
Jumper Setting Definition
Pins 1-2
Pins 2-3
Jumper Setting
Pins 1-2
Pins 2-3
Open
Jumper Setting
Pins 1-2
Pins 2-3
Jumper Setting
Pins 1-2
Pins 2-3
Jumper Setting
Pins 1-2
Pins 2-3
5-24
Settings
Enabled
Disabled
Watch Dog
Jumper Settings
Definition
Reset
NMI
Disabled
BMC Enable
Jumper Settings
Definition
BMC Enable
Disable
'97 Audio Enable
Jumper Settings
Definition
Enabled
Disabled
HD Audio Enable
Jumper Settings
Definition
Enabled
Disabled
Advertisement
Table of Contents
