Table of Contents
Advertisement
S
W
UPER
ORKSTATION 7047GR-TPRF User's Manual
Power Button
The Power Button connection is located
on pins 1 and 2 of JF1. Momentarily
contacting both pins will power on/off
the system. This button can also be
configured to function as a suspend
button (with a setting in the BIOS - See
Chapter 5). To turn off the power when
the system is in suspend mode, press
the button for 4 seconds or longer.
Refer to the table on the right for pin
definitions.
Serial Ports
Two COM connections (COM1 &
COM2) are located on the serverboard.
COM1 is located on the rear I/O panel.
COM2, located close to PCI-E CPU1
Slot1, provides front access support.
See the table on the right for pin
definitions.
Universal Serial Bus (USB)
Four Universal Serial Bus ports (USB
0/1, 2/3) are located on the I/O back
panel to provide rear USB connections.
Four front-accessible USB connections
(USB 6/7, 8/9) are located next to
S-SATA Port 3. In addition, two Type A
USB Embedded Drive connectors (USB
4, USB 5), located next to I-SATA 4/5,
are also used to provide front panel
USB connections (cables not included).
See the tables on the right for pin
definitions.
Pin Definitions (JF1)
Pin#
1
2
Serial COM Ports
Pin #
Definition
1
DCD
2
RXD
3
TXD
4
DTR
5
Ground
NC = No Connection
Backplane USB
Pin# Definition
1
2
3
4
5
Front Panel USB 6/7, 8/9, USB 4, 5
USB 6/8, 4
Pin #
Definition
1
+5V
3
USB_PN2
5
USB_PP2
7
Ground
9
Key
5-18
Power Button
Definition
Signal
Ground
Pin Definitions
Pin #
Definition
6
DSR
7
RTS
8
CTS
9
RI
10
N/A
(0/1, 2/3)
Pin Definitions
+5V
PO-
PO+
Ground
NA
Pin Definitions
USB 7/9, 5
Pin #
Definition
2
+5V
4
USB_PN3
6
USB_PP3
8
Ground
10
Ground
Advertisement
Table of Contents
