Supero 7047GR-TPRF User Manual page 90

S W
UPER ORKSTATION 7047GR-TPRF User's Manual
4. Place the hard drive to the hard drive tray. The hard drive may not completely
fill the tray. See Figure 6-12 for details.
5. Secure the hard drive to the carrier with four screws from the bottom.
6. Slide the hard drive into the chassis until the carrier clicks into place.
7. Repeat these steps for each hard drive carrier.
Warning: Except for short periods of time (swapping hard drives), do not operate the
workstation with the hard drive carriers removed.
Figure 6-12. Adding a Hard Drive to the Drive Carrier
Hard Drive Tray
Warning! Enterprise level hard disk drives are recommended for use in Supermicro
chassis and workstations. For information on recommended HDDs, visit the Supermicro
Web site at http://www.supermicro.com/products/nfo/storage.cfm.
Hard Drive
6-12