Skoda OCTAVIA Owner's Manual page 254

Hide thumbs Also See for OCTAVIA:
Table of Contents

Advertisement

Trailer recognition
Show road signs relevant to trailers - Activation/deactivation of the display of
road signs relevant to trailers
Use for route calculation - Activation / deactivation taking trailers in account
for route calculation in navigation
Maximum speed for trailer - Set the top speed for towing a trailer
Operation
Fig. 298 Display in the instrument cluster: example displays
Read and observe
on page 251 first.
Description of displays and displayed traffic signs
Display
» Fig. 298
 Display of detected traffic signs
display)
 Additional display (monochromatic display)
 Additional display (colour display)
252
Driving
Fig. 297
Sensor for traffic sign recogni-
tion
» page
54, Driving data (Multifunction
The system can display the following (vertical) traffic signs where identified.
Speed limit.
Overtaking prohibited.
Additional signs, such as 'when wet' or signs which only apply for a limited time
can also be displayed.
The system displays only traffic signs that are in the "viewing area" of the sen-
sor
» Fig.
297.
Data from the sensor is supplemented by information from the Infotainment
Navigation. This is the reason why traffic signs with maximum speeds can also
be shown on sections of roads which do not have any traffic signs.
Warning when exceeding the speed limit
The warning when exceeding the permissible speed (based on the detected
traffic sign) can be activated and set in
Mode when towing a trailer
For vehicles with a factory-fitted towing device, in Infotainment it is possible
to enable or disable the relevant traffic signs for trailer operation and the top
speed for towing a trailer
» page
Note
If, for example, you are on a motorway without speed limits, then a road sign
relating to the end of all limits is shown in the instrument cluster display.
Additional display
Read and observe
on page 251 first.
If the menu item Road sign is currently not shown
the road sign with the speed limit will appear in the upper display area of the
instrument cluster
» Fig. 298
on page 252 - , .
If several traffic signs are detected simultaneously, in some cases the next
traffic sign will also be displayed in the colour display -
.
All detected traffic signs can be displayed via the multifunction display in the
menu item Traffic Sign Recognition
The additional display can be activated / deactivated in Infotain-
ment» page
251.
Infotainment» page
251.
251, Settings in Infotainment.
» Fig. 298
on page 252 - ,
» Fig. 298
on page 252 -
» Fig. 298
on page 252 - .

Advertisement

Table of Contents
loading

Table of Contents