Mirrorlink - Skoda OCTAVIA Owner's Manual

Main menu - function surfaces and information
List of available applications
A
Other pages with applications (display the next page by running your fin-
B
ger sideways across the screen)
Depending on how long the function surface is pressed for:

▶ Tap - Return to main menu Apple Carplay
▶ Hold - Switching on voice control
Start the application
▶ In the Apple CarPlay main menu connection select the desired application in
the field » Fig. 205.
A
®

MirrorLink

Introduction to the subject
®
The MirrorLink - connection can be set up under the following conditions.
The ignition is switched on.

Infotainment is switched on.

The external device to be connected is switched on.

Some applications require the data connection in the connected external de-
vice to be switched on.
If you want to use the menu Telephone, then before establishing the
®
MirrorLink connection with the telephone then connect Infotainment first via
®
Bluetooth .
An external device connected using MirrorLink
source in the Media menu.
Fig. 206
Information about MirrorLink®
on the ŠKODA websites
®
cannot be used as an audio
If route guidance is taking place at this moment using Infotainment, then this
is not terminated by starting the route guidance in the MirrorLink
Read in the QR code» Fig. 206orenter the following address in the web brows-
er to open the website with information on the supported MirrorLink
http://go.skoda.eu/connectivity
main menu
Main menu - function surfaces and information
Return to SmartLink main menu

Displays a list of running applications with the ability to terminate them

Display the application last shown (as long as the application is running)/

show the display content of the connected external device
Settings of the SmartLink » page 140

List of applications
A
Other pages with applications (by performing a finger movement side-
B
ways across the screen, other pages with applications are displayed)
Application is not certified for use while driving

Operation
Start the application
®
▶ In the Mirrorlink connection main menu, select the desired application in the
field » Fig. 207 on page 177.
A
The application starts and the following function surfaces are displayed.
®
- application.
Fig. 207
MirrorLink®: Main menu
» page 175
menu or » page 145
SmartLink
®
system.

177