JRC JCY-1800 Installation Manual page 75

Connection table: Video input CH2
RCU
Connector #
RGB
Connector panel
J106 [R]
J107 [G]
J108 [B]
J109 [H]
J110 [V]
Cable Specification
4.2.6.1. Signal format of RADAR video
The video output format for a color raster scan display employs the five different signal types:
Signal Name
R RED
G GREEN
B BLUE
Hs HORIZONTAL Sync
Vs VERTICAL Sync
RADAR set
Connection #
R Red signal
G Green signal
B Blue signal
Hs Horizontal sync pulse
Vs Vertical sync pulse
Coaxial cable of 75-ohm impedance
e.g. 3C-2V / RG-59/U
Details of signal
The red intensity amplitude.
The standard voltage level is 0.7V peak.
Impedance is 75-ohm.
The green intensity amplitude.
The standard voltage level is 0.7V peak.
Impedance is 75-ohm.
The blue intensity amplitude.
The standard voltage level is 0.7V peak.
Impedance is 75-ohm.
Synchronized signals of the horizontal line (positive/negative),
Signal is in TTL level.
Synchronized signals of the vertical line (positive/negative),
Signal is in TTL level.
65
JCY-1800/1850 VDR/S-VDR Installation Guide
Signal Name
4. Cabling
DOC No. 7ZPJD0387C