JRC JCY-1800 Installation Manual page 40

2. Installation Procedures
JCY-1800/1850 VDR/S-VDR Installation Guide
4) System configuration diagram
● Normal system ( XGA or SXGA etc. )
An RGB cable is extended from radar and it connects to VDR.
● Chart radar system with NWP-46 (only UXGA)
By connecting NWP-46 to Radar, a LAN cable is extended and it connects to VDR.
5) Shipment units and parts
・ NWP-46 (The piece of Velcro for fixation to Radar is stuck on the bottom of the NWP-46.)
・ DVI-Dsub15 Display cable ( Radar - NWP-46)
・ LAN connector and Cover :
・ (Two pieces are used by NWP-46 and RCU sides. Three pieces are spares. )
・ Base for cable clamp : five pieces
・ Cable clamp : five pieces
DOC No. 7ZPJD0387C
five pieces (Connector is crimped to a LAN cable.)
30