Cisco Catalyst 2960 Command Reference Manual page 171

Chapter 2 Catalyst 2960 Switch Cisco IOS Commands
You can verify your settings by entering the show mac address-table notification privileged EXEC
command.
Related Commands Command
clear mac address-table
show mac address-table notification
snmp-server enable traps
snmp trap mac-notification
78-16882-01
Description
notification Clears the MAC address notification global counters.
Displays the MAC address notification settings on all
interfaces or on the specified interface.
Sends the SNMP MAC notification traps when the
mac-notification keyword is appended.
Enables the SNMP MAC notification trap on a specific
interface.
mac address-table notification
Catalyst 2960 Switch Command Reference
2-143