Cisco Catalyst 2960 Command Reference Manual page 566

Hide thumbs Also See for Catalyst 2960:

Table of Contents

vtp (VLAN configuration)

This example shows how to enable pruning in the proposed new VLAN database:

Switch(vlan)# vtp pruning

Pruning switched ON

This example shows how to enable v2 mode in the proposed new VLAN database:

Switch(vlan)# vtp v2-mode

V2 mode enabled.

You can verify your settings by entering the show vtp status privileged EXEC command.

Related Commands

switchport trunk

configuration)

Catalyst 2960 Switch Command Reference

Displays the VTP statistics for the switch and general information about the

VTP management domain status.

Configures the VLAN pruning-eligible list for ports in trunking mode.

Configures the VTP filename, interface, domain name, and mode.

Chapter 2 Catalyst 2960 Switch Cisco IOS Commands