Cisco Catalyst 2960 Command Reference Manual page 320

show errdisable recovery
Interfaces that will be enabled at the next timeout:
Interface
---------
Gi0/2
Note Though visible in the output, the unicast-flood field is not valid.
Related Commands Command
errdisable recovery
show errdisable detect
show errdisable flap-values
show interfaces
Catalyst 2960 Switch Command Reference
2-292
Errdisable reason Time left(sec)
----------------- --------------
link-flap 279
Description
Configures the recover mechanism variables.
Displays error-disabled detection status.
Displays error condition recognition information.
status Displays interface status or a list of interfaces in error-disabled state.
Chapter 2 Catalyst 2960 Switch Cisco IOS Commands
78-16882-01